Saltar al contenido principal

Sostituzione gruppo schermo iMac 27"2017

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 7 guías que incluyen este paso.

Inglés
Italiano
Paso 22
iMac 27" 2017 Display Assembly Replacement, Remove the remaining adhesive: paso 0, imagen 1 de 3 iMac 27" 2017 Display Assembly Replacement, Remove the remaining adhesive: paso 0, imagen 2 de 3 iMac 27" 2017 Display Assembly Replacement, Remove the remaining adhesive: paso 0, imagen 3 de 3
Remove the remaining adhesive
  • Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply (boxed in red).

  • Grasp the small tab at the end of one of the bottom edge display adhesive strips and pull the adhesive toward the top of the iMac to remove it.

  • Repeat this step with the other adhesive strip and remove it.

  • If either adhesive strip breaks before it's removed, use a plastic card to slice through the remaining adhesive.

Attenzione a non toccare i contatti dei condensatori o qualunque punto di saldatura esposto sul retro dell'alimentatore (riquadro rosso).

Prendi le piccole alette all'estremità di una delle strisce adesive sul bordo inferiore dello schermo e tirala verso il bordo superiore dell'iMac per rimuoverla.

Ripeti questo passaggi per l'altra striscia adesiva e rimuovila.

Se una delle due strisce si rompe prima di rimuoverla, usa una scheda in plastica per tagliare l'adesivo rimasto.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.