Saltar al contenido principal

Déconnecter la batterie

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 10 guías que incluyen este paso.

Inglés
Francés
Paso 3
Disconnect the Battery: paso 0, imagen 1 de 3 Disconnect the Battery: paso 0, imagen 2 de 3 Disconnect the Battery: paso 0, imagen 3 de 3
  • Peel the wireless charging coil off the battery starting with the left side.

  • The adhesive is weak but you can use an opening pick to cut it if necessary.

  • During reassembly start by snapping the midframe into place first before adhering the wireless charging coil.

Décollez la bobine de charge sans fil de la batterie en commençant du côté gauche.

L'adhésif n'est pas tenace, mais pouvez vous aider d'un médiator si nécessaire.

Lors du remontage, commencez par emboîter le châssis central avant de recoller la bobine.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.