Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 7 guías que incluyen este paso.
Traduciendo paso 3
Paso 3
-
Gently lift the screen and pull it apart from the camera, taking care to unslot the screen brackets from the tabs on the bottom and left side of the camera.
-
Do not pull too hard on the screen as there is still another delicate cable running from the screen to the rear board of the camera.
-
Gently pull the wide ribbon (shown in an earlier step) cable from the front of the camera to the back using tweezers.
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.