Saltar al contenido principal

iPod Touch 7. Generation Front Panel tauschen

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 10 guías que incluyen este paso.

Inglés
Alemán
Paso 6
iPod Touch 7th Generation Front Panel Replacement: paso 0, imagen 1 de 2 iPod Touch 7th Generation Front Panel Replacement: paso 0, imagen 2 de 2
  • Insert the plastic opening tool between the frame and the rear case behind the first clip.

  • Rock the tool sideways, to spread the gap behind the clip and separate it from the rear case.

  • This may not free the clip initially, but repeating the procedure for each clip will begin to loosen the piece.

Setze das Kunststoff-Öffnungswerkzeug zwischen dem Rahmen und dem hinteren Gehäuse hinter dem ersten Clip ein.

Bewege das Werkzeug seitwärts, um den Spalt hinter dem Clip zu vergrößern und ihn vom hinteren Gehäuse zu trennen.

Möglicherweise lässt sich der Clip dadurch zunächst nicht lösen, aber wenn du den Vorgang für jeden Clip wiederholst, wird sich das Teil langsam lockern.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.