Saltar al contenido principal

Colocación de fijaciones de esquí en un nuevo par de botas

Inglés
Español
Paso 6
Fitting Ski Bindings to a New Pair of Boots: paso 0, imagen 1 de 3 Fitting Ski Bindings to a New Pair of Boots: paso 0, imagen 2 de 3 Fitting Ski Bindings to a New Pair of Boots: paso 0, imagen 3 de 3
  • Insert the toe of the boot into the toe piece of the binding.

  • Push down on the boot until the boot clips into the binding. If needed, you can lift the lever on the heel piece to facilitate the procedure.

Inserta la puntera de la bota en la puntera de la fijación.

Empuja hacia abajo la bota hasta que se enganche en la fijación. Si es necesario, puedes levantar la palanca en la talonera para facilitar el procedimiento.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.