Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 10 guías que incluyen este paso.
Traduciendo paso 5
Paso 5
-
If the adhesive becomes hard to cut, it has most likely cooled down. Use your iOpener to reheat it.
-
Insert a fourth opening pick under the top left corner of the back cover.
-
Slide the opening pick along the top edge of the phone to cut the adhesive.
-
Leave the opening pick in the top right corner to prevent the adhesive from resealing.
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.