Saltar al contenido principal

Infinity v2 10.1 Back Case Replacement

Aviso: Ahora estás editando un requisito previo de la guía que estabas viendo. Cualquier cambio que realices afectará a todas las 5 guías que incluyen este paso.

Inglés
Español

Traduciendo paso 1

Paso 1
Infinity v2 10.1 Back Case Replacement: paso 0, imagen 1 de 3 Infinity v2 10.1 Back Case Replacement: paso 0, imagen 2 de 3 Infinity v2 10.1 Back Case Replacement: paso 0, imagen 3 de 3
  • Slightly pry open one corner of the device by using your finger nail to separate the screen from the back case.

  • Use an opening tool to carefully detach the back case from the tablet. Start by inserting the tool where your fingernail opened a gap, and work around all four sides of the device.

  • There will be a slight click noise as you free each tab.

  • Once the case is completely free, carefully lift it and place it face up on the workstation, being cautious not to damage the speaker wires connecting the two halves.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.