Repara tus cosas Comunidad Tienda

打开屏幕流程

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 13 guías que incluyen este paso.

Volver a la Guía
Inglés
Chino
Paso 4
Opening Procedure: paso 0, imagen 1 de 3 Opening Procedure: paso 0, imagen 2 de 3 Opening Procedure: paso 0, imagen 3 de 3

  • Heat an iOpener and thread it through the arms of the Anti-Clamp.

  • You can also use a hair dryer, heat gun, or hot plate—but extreme heat can damage the display and/or internal battery, so proceed with care.

  • Fold the iOpener so it lays on the bottom edge of the iPhone.

  • Wait one minute to give the adhesive a chance to release and present an opening gap.

  • Insert an opening pick into the gap under the screen and the plastic bezel, not the screen itself.

  • If the Anti-Clamp doesn't create a sufficient gap, apply more heat to the area and rotate the handle a quarter turn.

  • Don't crank more than a quarter turn at a time, and wait one minute between turns. Let the Anti-Clamp and time do the work for you.

  • Skip the next three steps.

加热iOpener 並并将其穿过反向钳。

将iOpener晚期，使其能躺在iPhone的底部。

等待1分钟，使手机胶水软化。

另外，你也可以使用吹风机或是热风枪软化胶水。

当反向钳将手机底部撑开一条缝后，将三角撬片插入缝隙中，而非手机屏幕里。

若反向钳无法撑开一个缝隙时，你可以尝试再次加热手机，并将把手旋转1/4圈。

请不要一次旋转把手超过1/4圈，并且在每次旋转之间等到1分钟，让时间和反向钳为你制造奇迹。

请跳过之后的三个步骤

[* black] [guide|25705|Heat an iOpener|new_window=true] and thread it through the arms of the Anti-Clamp.
[* icon_note] You can also use a [guide|157348|hair dryer|new_window=true], [guide|151116|heat gun|new_window=true], or hot plate—but extreme heat can damage the display and/or internal battery, so proceed with care.
[* black] Fold the iOpener so it lays on the bottom edge of the iPhone.
[* black] Wait one minute to give the adhesive a chance to release and present an opening gap.
-[* orange] Insert an opening pick into the gap under the screen and the plastic bezel, ***not the screen itself.***
+[* green] Insert an opening pick into the gap under the screen and the plastic bezel, ***not the screen itself.***
[* icon_note] If the Anti-Clamp doesn't create a sufficient gap, apply more heat to the area and rotate the handle a quarter turn.
[* icon_caution] Don't crank more than a quarter turn at a time, and wait one minute between turns. Let the Anti-Clamp and time do the work for you.
[* black] ***Skip the next three steps.***

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.