Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará la guía que incluye este paso.
Traduciendo paso 5
Paso 5
-
Unscrew the three 3.5 mm screws that secure the circuit board using a Phillips #00 screwdriver.
-
Remove the circuit board by lifting upward.
-
To fully remove the USB ports from the circuit board, you'll need to desolder the points. Use the How to Solder and Desolder Connections guide for more information on soldering and desoldering connections.
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.