Dell XPS 15 9575 ヒートシンクの交換

Inglés

Japonés

Prerrequisitos de Guía

Deben traducirse todas las guías de prerrequisitos antes de que esta traducción se considere completa.

Dell XPS 15 9575 下部カバーの交換

Información de Guía

= Hecho = Incompleto

¿Qué pieza estás reemplazando?

Título

Introducción

This guide will show you how to remove the heat sink in a Dell XPS 15 9575 laptop.

The heat sink works in tandem with the fan to cool the laptop and offset the heat produced by the central processing unit. The heat sink sits directly over the CPU, and funnels heat to the fan unit where it can be dispersed. Since the heat sink is bonded to the CPU with thermal paste to ensure good thermal transfer, you will need to reapply the thermal paste during reinstallation. Be sure to clean both the heat sink and CPU with isopropyl alcohol and follow our [guide|744|How to Reapply Thermal Paste] guide for best practice on reapplication.

Since the heatsink is a static rather than dynamic component, its failure most likely involves aging or faulty thermal paste. If the fans of the device still function properly, excessive heat may not be obvious, so instead look to the heatsink when the processing of the computer seems to have issues. If your computer experiences regular freezing, trouble handling intensive tasks, or crashing after substantial use, replacing the thermal paste of the heatsink may help. The heatsink should only be replaced completely if there is obvious physical damage, but you should check out the [[Dell XPS 15 9575 Troubleshooting|Dell XPS 15 9575 Troubleshooting page]] for more details.

Conclusión

¿Qué pieza estás reemplazando?

Título

Introducción

Conclusión

Pasos de la guía

Paso 1

プラスチックのオープニングピックをアルミカバーとマザーボードの間に差し込み￥ます。

Paso 2

#0プラスドライバーを使って、長さ3.2mmの黒いねじを5本外します。

Paso 3

ヒートシンクの縁とアルミの外周の間に、プラスチック製のオープニングピックを、下のCPUに傷をつけないように注意しながら差し込みます。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.