Repara tus cosas Comunidad Tienda

如何使用定制的胶带

Volver a la Guía
Inglés
Chino
Paso 8
How to Apply Custom-cut Adhesive Strips, Further strengthen the adhesive bond: paso 0, imagen 1 de 3 How to Apply Custom-cut Adhesive Strips, Further strengthen the adhesive bond: paso 0, imagen 2 de 3 How to Apply Custom-cut Adhesive Strips, Further strengthen the adhesive bond: paso 0, imagen 3 de 3
Further strengthen the adhesive bond

  • Once you've installed your part or sealed up your device, you can strengthen the bond by heating up the adhesive.

  • Soft adhesives, which are usually messy and hard to clean, benefit from a reheat.

  • Harder adhesives that resemble tape may not benefit as much, but the heat can help the adhesive fill in gaps.

  • Use a hair dryer, iOpener, or heat gun to lightly heat the part or closed device in the areas where the new adhesive was applied.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

+[title] Further strengthen the adhesive bond
+[* icon_note] Once you've installed your part or sealed up your device, you can strengthen the bond by heating up the adhesive.
+ [* icon_note] Soft adhesives, which are usually messy and hard to clean, benefit from a reheat.
+ [* icon_note] Harder adhesives that resemble tape may not benefit as much, but the heat can help the adhesive fill in gaps.
+[* black] Use a [guide|157348|hair dryer|new_window=true], [guide|25705|iOpener|new_window=true], or [guide|151116|heat gun|new_window=true] to lightly heat the part or closed device in the areas where the new adhesive was applied.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.