Saltar al contenido principal

华为荣耀8后玻璃盖移除

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 6 guías que incluyen este paso.

Inglés
Chino
Paso 4
Huawei Honor 8 Rear Glass Removal: paso 0, imagen 1 de 3 Huawei Honor 8 Rear Glass Removal: paso 0, imagen 2 de 3 Huawei Honor 8 Rear Glass Removal: paso 0, imagen 3 de 3
  • The fingerprint cable is located above the power and volume buttons on this side of the phone. Only use the tip of the opening pick in this area to avoid damage.

  • Insert a third opening pick at the bottom left corner.

  • Start to slide the tip of the opening pick from the bottom left corner along the side to cut the adhesive.

  • Leave the opening pick in its place at the top left corner to prevent the adhesive from resealing.

指纹电缆位于手机此侧的电源和音量按钮上方。仅在此区域使用开口镐的尖端,以免造成损坏。

在左下角插入第三个空挡。

从左下角开始沿着侧面滑动三角撬片的尖端,以切割粘合剂。

将三角撬片留在左上角,以防止胶粘剂重新密封。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.