Saltar al contenido principal

华为荣耀8后玻璃盖移除

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 6 guías que incluyen este paso.

Inglés
Chino
Paso 2
Huawei Honor 8 Rear Glass Removal: paso 0, imagen 1 de 3 Huawei Honor 8 Rear Glass Removal: paso 0, imagen 2 de 3 Huawei Honor 8 Rear Glass Removal: paso 0, imagen 3 de 3
  • If the phone's rear glass is cracked, the suction cup may not stick. Try lifting it with strong tape, or superglue the suction cup in place and allow it to cure so you can proceed.

  • Secure a suction handle to the lower edge of the rear glass, as close to the edge as possible.

  • Lift the rear glass with the suction cup to create a small gap between the glass and the frame.

  • Insert an opening pick into the gap.

  • If you have trouble, apply more heat to further soften the adhesive. Follow the iOpener instructions to avoid overheating.

  • Slide the opening pick to the bottom right corner.

如果手机的后玻璃破裂,则吸盘可能不会粘住。尝试用牢固的胶带将其提起,或将吸盘粘在适当的位置并使其固化,以便继续进行。

将吸手固定在后玻璃板的下边缘,并尽可能靠近边缘。用吸盘提起后玻璃板,以在玻璃板和框架之间形成一个小的间隙。

将三角撬片插入间隙中。

如果遇到问题,请施加更多热量以进一步软化粘合剂。请按照iOpener说明进行操作,以免过热。

将三角撬片滑动到右下角。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.