Saltar al contenido principal

iPod Touch 5. Generation Akku tauschen

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 16 guías que incluyen este paso.

Inglés
Alemán
Paso 3
iPod Touch 5th Generation Battery Replacement: paso 0, imagen 1 de 2 iPod Touch 5th Generation Battery Replacement: paso 0, imagen 2 de 2
  • There are three notches on either side of the battery. In the next few steps, you will be using these notches to gradually pry the battery up from the rear case.

  • The battery is secured with large amounts of adhesive, so you'll need to go slowly and carefully to avoid puncturing or creasing the battery.

  • Insert a plastic opening tool into the top right notch and gently pry up on the battery.

  • Do not attempt to pry up the entire battery at this point; you just want to start to loosen the adhesive at each of the prying points, in turn.

Auf jeder Seite des Akkus befinden sich drei Kerben. In den nächsten Schritten wirst du diese Kerben nutzen, um den Akku nach und nach aus dem Rückgehäuse zu hebeln.

Der Akku ist mit sehr viel Kleber befestigt, du musst daher langsam und sorgfältig arbeiten, um zu vermeiden, dass der Akku in irgendeiner Form beschädigt wird.

Setze ein Kunststoff-Öffnungswerkzeug in die oberer rechte Kerbe und heble vorsichtig am Akku.

Versuche an diesem Punkt nicht, den gesamten Akku herauszuhebeln. Löse nur nacheinander den Kleber an jedem der Hebelpunkte.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.