第4世代 iPod Nanoのロジックボードアセンブリの交換

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 3 guías que incluyen este paso.

Inglés

Japonés

Traduciendo paso 7

Paso 7

Use a pair of tweezers to slide the click wheel ribbon cable out of its socket.
Before proceeding, be sure that both the click wheel ribbon cable socket and its cable are freed from the adhesive securing them to the dock connector and logic board.
Peel back the cable on both ends!

-	[* black] Use a pair of tweezers to slide the click wheel ribbon cable out of its socket.
+	[* black] Use a pair of [product\|IF145-020\|tweezers] to slide the click wheel ribbon cable out of its socket.
	[* icon_caution] Before proceeding, be sure that *both* the *click wheel ribbon cable socket* ''and'' *its cable* are freed from the adhesive securing them to the dock connector and logic board.
	[* black] Peel back the cable on both ends!

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.