Repara tus cosas Comunidad Tienda

拆开步骤

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 9 guías que incluyen este paso.

Volver a la Guía
Inglés
Chino
Paso 4
Opening Procedure: paso 0, imagen 1 de 3 Opening Procedure: paso 0, imagen 2 de 3 Opening Procedure: paso 0, imagen 3 de 3

  • Heat an iOpener and thread it through the arms of the Anti-Clamp.

  • You can also use a hair dryer, heat gun, or hot plate—but extreme heat can damage the display and/or internal battery, so proceed with care.

  • Fold the iOpener so it lays on the bottom edge of the iPhone.

  • Wait one minute to give the adhesive a chance to release and present an opening gap.

  • Insert an opening pick under the screen and the plastic bezel, not the screen itself.

  • If the Anti-Clamp doesn't create a sufficient gap, apply more heat to the area and rotate the handle a quarter turn.

  • Don't crank more than a quarter turn at a time, and wait one minute between turns. Let the Anti-Clamp and time do the work for you.

  • Skip the next three steps.

加热 iOpener 并将其穿过反向钳。

你还可以使用吹风机、热风枪或电热板，但过热可能会损坏显示屏和/或内部电池，因此请小心操作。

折叠 iOpener，使其位于 iPhone 的底部边缘。

等待一分钟，让粘合剂有机会释放并出现开口间隙。

在屏幕和塑料边框下方插入三角撬片，而不是屏幕本身。

如果反向钳无法形成足够的间隙，请对该区域施加更多热量并将手柄旋转四分之一圈。

一次不要转动超过四分之一圈，并在转动之间等待一分钟。 把工作交给反向钳和时间来完成。

跳过接下来的三个步骤。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.