拆开步骤

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 9 guías que incluyen este paso.

Inglés

Chino

Traduciendo paso 11

Paso 11

The top edge of the display is secured with both glue and clips.
Slide the opening pick around the top corner of the display, while gently pulling or wiggling the display down in the direction of the Lightning port.
The clips will break if you use too much force. Work carefully and be patient.
Don't insert your pick more than 3 mm, as you may damage the front panel sensor array.
Slide the pick to the opposite corner and cut any remaining adhesive securing the display.

显示屏的上边缘由胶水与卡扣一同固定。
在显示屏的上角划动塑料拨片，并轻轻地向下朝闪电接口方向拉动或者滑动显示屏。
若用力过猛可能会损坏卡扣，请小心操作。
请勿将撬片尖端插入超过 3 毫米，否则可能会损坏前面板传感器阵列。
划动塑料拨片至另一边角以划开剩下的固定胶。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.