Saltar al contenido principal

更换 iPhone XR 五角螺丝

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 9 guías que incluyen este paso.

Inglés
Chino

Traduciendo paso 1

Paso 1
iPhone XR Pentalobe Screws Replacement, Remove the pentalobe screws: paso 0, imagen 1 de 2 iPhone XR Pentalobe Screws Replacement, Remove the pentalobe screws: paso 0, imagen 2 de 2
Remove the pentalobe screws
  • Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.

  • Power off your iPhone before beginning disassembly.

  • Remove the two 6.7 mm-long pentalobe screws at the bottom edge of the iPhone.

  • Opening the iPhone will compromise its waterproof seals. Have replacement seals ready before you proceed past this step, or take care to avoid liquid exposure if you reassemble your iPhone without replacing the seals.

  • There's a black rubber gasket just beneath the head on each pentalobe screw. For maximum protection against dust and liquid, check the condition of the gaskets or replace the screws during reassembly.

在开始之前,请将iPhone电池的电量降至25%以下。充电的锂离子电池如果意外被刺破可能会着火和/或爆炸。

在开始拆卸之前关闭iPhone电源。

取下 iPhone 底部边缘的两颗6.7 mm 长的五角螺丝。

打开 iPhone 会损害其防水密封。在完成此步骤之前,请准备好更换密封件,或者在不更换密封件的情况下重新组装 iPhone 时,请注意避免液体暴露。

每个五角形螺丝的头部下方有一个黑色橡胶垫圈。为了最大程度地防止灰尘和液体进入,请在重新组装时检查垫圈的状况或更换螺丝。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.