Canon EOS 20D Rear Case Replacement

Aviso: Ahora estás editando un requisito previo de la guía que estabas viendo. Cualquier cambio que realices afectará a todas las 3 guías que incluyen este paso.

Volver a la Guía

Inglés

Español

Paso anterior

Traduciendo paso 4

Paso 4

Canon EOS 20D Rear Case Replacement, Lift and remove the rear panel: paso 0, imagen 1 de 3

Canon EOS 20D Rear Case Replacement, Lift and remove the rear panel: paso 0, imagen 2 de 3

Canon EOS 20D Rear Case Replacement, Lift and remove the rear panel: paso 0, imagen 3 de 3

Lift and remove the rear panel

When lifting the panel, make sure not to lift it too high, since you'll run the risk of tearing the cable, or damaging the connector on the board.
Flip the lock on the flex cable connector up with a spudger.
The front panel should pop off, now that the cable has been disconnected.
When reassembling the device, make sure to insert the left side of the front panel first, since it has a small lip that needs to fit under the left part of the camera case.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.

Canon EOS 20D Rear Case Replacement

Traduciendo paso 4

Atajos de Teclado para Edicion de Pasos de Guia: