Saltar al contenido principal

LG V20 Display austauschen

Inglés
Alemán
Paso 3
LG V20 Display Replacement: paso 0, imagen 1 de 3 LG V20 Display Replacement: paso 0, imagen 2 de 3 LG V20 Display Replacement: paso 0, imagen 3 de 3
  • If the broken glass makes it difficult to get a suction cup to stick in the next few steps, try folding a strong piece of tape (such as duct tape) into a handle and lifting the display with that.

  • Use a suction cup to lift the upper end of the display until you can insert the tip of an opening pick.

  • Only insert the tip of the opening to not damage any components beneath the display.

  • Slide the opening pick around all sides of the phone to cut the adhesive.

  • Leave an opening pick in each corner of the phone to prevent the adhesive from resealing.

  • Don't lift up the display straight away after you cut the adhesive on all sides. The two display cables are still threaded through the mid frame of the phone.

Falls der Saugheber in den nächsten Schritten auf dem gebrochenen Glas nicht gut hält, versuche, ein Stück starkes Klebeband zu einer Schlaufe zu falten und damit das Display anzuheben.

Benutze einen Saugheber, um das obere Ende des Displays soweit anzuheben, dass du die Spitze eines Plektrum darunter schieben kannst.

Setze nur die Spitze des Plektrums ein, um zu vermeiden, dass Bauteile unter dem Display beschädigt werden.

Schiebe das Plektrum um alle Seiten des Smartphones herum, um den Kleber zu durchtrennen.

Lasse in jeder Ecke ein Plektrum stecken, damit sich der Kleber nicht wieder verbindet.

Hebe das Display nicht gleich nach dem Durchtrennen des Klebers weg. Die beiden Displaykabel führen immer noch durch den Mittelrahmen.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.