如何使用一块预先切好的胶带

Inglés

Chino

Traduciendo paso 1

Paso 1

Surface Preparation

Begin by removing all the old adhesive, glass, and any other debris from all adhesion surfaces.
You can pull the adhesive off with tweezers or your fingers, roll it up on the tip of a spudger with a roll-and-pull motion, or scrape it off with the flat end of a spudger.
After removing most of the adhesive, scrape with the tip of a spudger to get small bits of adhesive out of tight spaces.
When working around a battery, be extremely careful not to accidentally puncture or bend the battery.

准备工作

首先从所有表面上清除所有旧的粘合剂、玻璃和任何其他碎屑。
您可以用镊子或手指将粘合剂撕掉，用撬棒尖端以滚动和拉动的方式将其卷起，或用撬棒的平端将其刮掉。
去除大部分粘合剂后，用撬棒的尖端刮擦，从狭小的空间中刮出少量粘合剂。
在电池周围工作时，要特别小心，不要意外刺穿或弯曲电池。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.