Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 6 guías que incluyen este paso.

Inglés
Chino
Paso 5
When the adhesive has been separated on all three sides properly you will be able to slowly lift the back cover. Don't force it open. Use an iOpener to again soften the adhesive if the back cover won't come off or starts to bend. Pay attention to the fingerprint sensor connector when flipping the back cover open. You might need to disconnect it as described in the next step.
  • When the adhesive has been separated on all three sides properly you will be able to slowly lift the back cover.

  • Don't force it open. Use an iOpener to again soften the adhesive if the back cover won't come off or starts to bend.

  • Pay attention to the fingerprint sensor connector when flipping the back cover open. You might need to disconnect it as described in the next step.

当三条边的胶水都被划开了以后,你就可以缓慢地打开背面玻璃了。

不要用太大力。如果背面玻璃无法被分开或是开始弯曲,用iOpener重新加热来软化胶水。

当你翻开背面玻璃时,当心指纹识别器的连接线。你可能需要把链接线分开,下一步有所说明。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.