Saltar al contenido principal

Samsung Galaxy Note8 バックカバーの交換

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 6 guías que incluyen este paso.

Inglés
Japonés
Paso 2
Samsung Galaxy Note8 Back Cover Replacement: paso 0, imagen 1 de 3 Samsung Galaxy Note8 Back Cover Replacement: paso 0, imagen 2 de 3 Samsung Galaxy Note8 Back Cover Replacement: paso 0, imagen 3 de 3
  • Use a suction handle to lift the back cover and create an opening pick to get in the gap.

  • Since the back cover is also slightly curved at the edges you want to insert the opening pick at a lower angle from underneath.

  • Start at the middle of the side and cut the adhesive while pulling up with the suction handle.

  • Be careful not to lever the opening pick too much to avoid breaking the back cover. Rather pull with the suction handle and use the pick for cutting the adhesive.

  • Move the pick towards the bottom corner and leave it there to keep the adhesive from resealing to the case.

  • Use another pick and move it to the top corner.

  • If it's getting harder to move the pick you might need to reheat the iOpener and apply it to the back cover again.

吸盤ハンドルを使ってバックカバーを持ち上げて、生じた隙間に開口ピックを差し込みます。

バックカバーはわずかにエッジがカーブしているため、開口ピックを下側から低い角度で差し込んでください。

デバイス横の中央部分から作業を始めて、吸盤ハンドルを引き上げながら、ピックで接着剤を切開します。

開口ピックをテコのように大きく動かしすぎないでください。バックカバーを破損することがあります。吸盤ハンドルを引き上げながら、開口ピックをスライドして接着剤を切開します。

開口ピックを下側コーナーに向けて動かし、接着剤がケースに再装着しないよう、その場に残しておきます。

別の開口ピックを使って上部コーナーまで移動します。

ここに翻訳を挿入する

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.