Saltar al contenido principal

Sostituzione cover posteriore Samsung Galaxy Note8

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 6 guías que incluyen este paso.

Inglés
Italiano
Paso 2
Samsung Galaxy Note8 Back Cover Replacement: paso 0, imagen 1 de 3 Samsung Galaxy Note8 Back Cover Replacement: paso 0, imagen 2 de 3 Samsung Galaxy Note8 Back Cover Replacement: paso 0, imagen 3 de 3
  • Use a suction handle to lift the back cover and create an opening pick to get in the gap.

  • Since the back cover is also slightly curved at the edges you want to insert the opening pick at a lower angle from underneath.

  • Start at the middle of the side and cut the adhesive while pulling up with the suction handle.

  • Be careful not to lever the opening pick too much to avoid breaking the back cover. Rather pull with the suction handle and use the pick for cutting the adhesive.

  • Move the pick towards the bottom corner and leave it there to keep the adhesive from resealing to the case.

  • Use another pick and move it to the top corner.

  • If it's getting harder to move the pick you might need to reheat the iOpener and apply it to the back cover again.

Usa una ventosa per sollevare il case posteriore e un plettro di apertura per inserirlo nella fessura che si è creata.

Siccome i bordi della cover posteriore sono leggermente incurvati, è meglio inserire il plettro da sotto e inclinandolo.

Partendo dal centro del lato, taglia l'adesivo mentre tiri sulla ventosa.

Stai attento a non far leva troppo forte con il plettro di apertura per evitare di rompere il case posteriore. È meglio tirare sulla ventosa e usare il plettro per tagliare l'adesivo.

Fai scorrere il plettro verso l'angolo inferiore e lascialo qui per impedire che l'adesivo aderisca di nuovo alla cover.

Prendi un'altro plettro e fallo scorrere verso l'angolo superiore.

Se diventa sempre più difficile spostare il plettro, dovrai forse riscaldare e applicare di nuovo l'iOpener sulla cover posteriore.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.