Mac mini Model A1176 Internal Frame Replacement

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 21 guías que incluyen este paso.

Volver a la Guía

Inglés

Japonés

Traduciendo paso 1

Paso 1

Mac mini Model A1176 Internal Frame Replacement: paso 0, imagen 1 de 3

Mac mini Model A1176 Internal Frame Replacement: paso 0, imagen 2 de 3

Mac mini Model A1176 Internal Frame Replacement: paso 0, imagen 3 de 3

Later in this guide you will remove several recessed Phillips screws. Bit drivers are generally too large to fit in the recesses, so be sure to have a thin shafted Phillips screwdriver on hand.
First remove the AirPort antenna (the larger of the two), located near the power button.
Slightly squeeze the two retaining arms toward each other and lift the AirPort antenna off its post.
Squeezing the two posts excessively will surely break them off the internal frame. Work delicately.
During reinstallation, you will have to slightly squeeze the two posts together so they fit into the openings on the AirPort antenna board.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.