iPad 3 4G版前面板的移除

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 153 guías que incluyen este paso.

Inglés

Chino

Traduciendo paso 13

Paso 13

This step requires you to move the opening pick along the bottom right edge of the front panel. The Wi-Fi antenna is very close to the corner and is easily severed if the adhesive is released improperly.
Do not completely remove the pick from under the front glass, but pull it out just a little bit so that ~1/8" (3 mm) of the tip is still under the front glass.
Slide the tip of the opening pick along the bottom edge of the iPad, releasing the adhesive over the Wi-Fi antenna.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.