Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Inglés
Español

Traduciendo paso 3

Paso 3
Continue prying the audio control cable up from the rear case. If your replacement part doesn't include the metal bracket, use a heat gun or hair dryer to soften the adhesive on the audio control cable and peel it off of the metal bracket with a spudger. If your replacement part doesn't include the metal bracket, use a heat gun or hair dryer to soften the adhesive on the audio control cable and peel it off of the metal bracket with a spudger.
  • Continue prying the audio control cable up from the rear case.

  • If your replacement part doesn't include the metal bracket, use a heat gun or hair dryer to soften the adhesive on the audio control cable and peel it off of the metal bracket with a spudger.

Continúa levantando el cable de control de audio de la caja trasera.

Si tu parte de reemplazo no incluye el soporte de metal, usa una pistola de aire caliente o secador de pelo para ablandar el adhesivo en el cable de control de audio y despégalo del soporte de metal con un spudger.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.