Saltar al contenido principal

液晶パネルの開け方

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 23 guías que incluyen este paso.

Inglés
Japonés

Traduciendo paso 13

Paso 13
Opening Procedure: paso 0, imagen 1 de 3 Opening Procedure: paso 0, imagen 2 de 3 Opening Procedure: paso 0, imagen 3 de 3
  • Open the iPhone by swinging the display up from the left side, like the back cover of a book.

  • Don't try to fully separate the display yet, as several fragile ribbon cables still connect it to the iPhone's logic board.

  • As pictured, make sure the frame comes off with display and doesn't get stuck in the device.

  • Lean the display against something to keep it propped up while you're working on the phone.

  • During reassembly, lay the display in position, align the clips along the top edge, and carefully press the top edge into place before snapping the rest of the display down. If it doesn't click easily into place, check the condition of the clips around the perimeter of the display and make sure they aren't bent.

iPhoneの左側からディスプレイを持ち上げて開口します。(本のページをめくるように)

まだディスプレイを完全に外さないでください。幾つかの壊れやすいリボンケーブルが基板と繋がったままです。

画像のように、フレームからディスプレイが外れて、デバイスに引っかかっていないか確認してください。

ディスプレイを衝立のようなものに立て掛けて固定してください。

再組み立ての際は、ディスプレイを元の位置にもどします。上部端に沿って付けられたクリップを揃えて、上部からはめていきます。簡単に元の位置に入らない場合は、ディスプレイ周辺に付けられたクリップの状態が曲がっていないか確認してください

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.