iRobot Roomba 692 Side Brush Motor Replacement

Introducción

This guide will teach you how to access, remove, and replace the side brush motor of the iRobot Roomba 692. If you are replacing the side brush, ensure that you have the battery for the Roomba 692 prior to removal.

Remember to review the iRobot Roomba 692 Troubleshooting Page before attempting any maintenance or repairs on your vacuum.

Qué necesitas

Paso 1 Battery

iRobot Roomba 692 Side Brush Motor Replacement, Battery: paso 1, imagen 1 de 3

iRobot Roomba 692 Side Brush Motor Replacement, Battery: paso 1, imagen 2 de 3

iRobot Roomba 692 Side Brush Motor Replacement, Battery: paso 1, imagen 3 de 3

To access the iRobot Roomba 692 battery compartment, flip your iRobot Roomba 692 upside down.
Using the Phillips #0 screwdriver, remove the 4.0mm screw in the center of the yellow side brush and lift the part out.

Editar

Paso 2

iRobot Roomba 692 Side Brush Motor Replacement: paso 2, imagen 3 de 3

Use a Phillips #0 screwdriver to remove the four black 3.5 mm screws on the bottom panel.
Remove the bottom panel.
Can't find the screws? Refer to the red circles in the Step 1 image.