Introducción

Replace the rear case on your iPod shuffle for a shiny new clip.

Partes

No se requieren partes.

Widen the small gap between the front and rear case by inserting a metal spudger into the gap near the top of the iPod.
  • Widen the small gap between the front and rear case by inserting a metal spudger into the gap near the top of the iPod.

  • Be careful when using a metal spudger, as you may scratch the outer case.

Agregar Comentario

Insert an iPod opening tool into the newly widened gap, and pry the rear case up and away from the front case.
  • Insert an iPod opening tool into the newly widened gap, and pry the rear case up and away from the front case.

Agregar Comentario

  • Insert the iPod Shuffle opening tool into the gap between the front and rear case on the same side, at the bottom corner of the iPod.

  • Pry the rear case away from the front case.

Agregar Comentario

  • Lift the bottom of the rear case and remove it from the rest of the iPod.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Matthew Newsom

Miembro Desde 05/01/10

31,755 Reputación

67 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 1

Últimos 30 Días: 19

Todo El Tiempo: 6,317