Introducción
이 안내서를 사용하여 iPhone XS 디스플레이 패널을 고정하는 나사 두 개를 빼거나 교체하세요. 이들은 iPhone의 유일한 외부 나사입니다. Apple 고유 설계 5-점 별나사를 사용하므로 빼려면 특수 P2 pentalobe/펜타로브 드라이버가 필요합니다.
Qué necesitas
-
-
분해를 시작하기 전에 iPhone 전원을 꺼주세요.
-
iPhone 하단 가장자리에 위치한 6.9mm-길이 pentalobe/펜타로브 나사 두 개를 빼주세요.
-
-
기기를 재조립하려면 이 지침을 역순으로 따르세요.
기기를 재조립하려면 이 지침을 역순으로 따르세요.
Cancelar: No complete esta guía.
14 personas más completaron esta guía.
Un agradecimiento especial a estos traductores:
100%
¡ Christian Kim nos está ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›
2 comentarios
On the screws what is the black stuff at the end of the screws? Because it came off my screws now I’m concerned that I have compromised the waterproof ness of my phone