Repara tus cosas Comunidad Tienda

iPad 4 Wi-Fi Front Panel Assembly Replacement

Sólo Prerrequisito
Esta guía solo debería usarse como prerrequisito para otras guías. Por tanto, estará incompleta.

Introducción

Preq for removing the front panel. Specific to the iPad 4, also involves moving the LCD over.

Qué necesitas

  1. iPad 4 Wi-Fi Front Panel Assembly Replacement, Front Panel Assembly: paso 1, imagen 1 de 2 iPad 4 Wi-Fi Front Panel Assembly Replacement, Front Panel Assembly: paso 1, imagen 2 de 2

    • Remove the four 2 mm Phillips #00 screws securing the LCD to the aluminum frame.

    • The bottom left screw is obscured by the home button ribbon cable connector. Carefully move the home button ribbon cable aside to remove the bottom left screw.

    Traducir

  3. iPad 4 Wi-Fi Front Panel Assembly Replacement: paso 2, imagen 1 de 3 iPad 4 Wi-Fi Front Panel Assembly Replacement: paso 2, imagen 2 de 3 iPad 4 Wi-Fi Front Panel Assembly Replacement: paso 2, imagen 3 de 3

    • Using a plastic opening tool or a spudger, lift the right edge of the LCD out of the iPad.

    • Rotate the LCD along its left edge and lay it down on top of the front glass panel.

    • Be careful as you move the LCD. The ribbon cable is fragile and may break if it is flexed too much.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 108