Saltar al contenido principal

Introducción

This helps link the Front Panel Assembly guide to any guide that may follow it, it flips the LCD so the user can continue working in the rear case of the iPad.

  1. In order to work on the iPad's innards, we need to flip the LCD back out of the case.
    • In order to work on the iPad's innards, we need to flip the LCD back out of the case.

    • Lift the LCD from its long edge closest to the volume buttons and gently flip it out of the rear case—like turning the page in a book.

    • Set the LCD face down on a clean surface. You may want to rest it on a soft cloth to prevent scratches.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Sam Goldheart

Miembro Desde 18/10/12

374,002 Reputación

541 Guías creadas

Equipo

iFixit Miembro de iFixit

Community

98 Miembros

8,930 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 1

Todo El Tiempo: 41