Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará la guía que incluye este paso.
Traduciendo paso 4
Paso 4
-
Remove the back cover.
-
Use a Phillips #00 screwdriver to remove all the screws from the metal, inside panel, including four black 4.0 mm screws along the top.
-
Remove four black 3.0 screws along the bottom.
-
Remove the one silver 5.0 mm screw in the top right corner.
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.