iPad 2 CDMA Battery Replacement

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará la guía que incluye este paso.

Volver a la Guía

Inglés

Español

Traduciendo paso 1

Paso 1

iPad 2 CDMA Battery Replacement: paso 0, imagen 1 de 3

iPad 2 CDMA Battery Replacement: paso 0, imagen 2 de 3

iPad 2 CDMA Battery Replacement: paso 0, imagen 3 de 3

Reheat the iOpener in the microwave for one minute.
Remember to be careful not to overheat the iOpener during the repair procedure. Wait at least two minutes before reheating the iOpener, and never microwave it for more than one minute.
Place the heated iOpener on the back of the iPad just right of center (the side opposite the rear facing camera). Let it sit there for 90 seconds to soften the battery adhesive.
Move the iOpener to the center of the back of the iPad and let the iOpener sit for another 90 seconds.
If the iOpener cools significantly between sittings, reheat it for another minute.
Move the iOpener to the left edge (the side with the rear facing camera) of the back of the iPad and let the iOpener sit for another 90 seconds.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.