Saltar al contenido principal

Canon PowerShot SD960 IS LCD Screen Replacement

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará la guía que incluye este paso.

Inglés
Español

Traduciendo paso 1

Paso 1
Canon PowerShot SD960 IS LCD Screen Replacement: paso 0, imagen 1 de 1
  • Working on your electronic device while it is powered on can result in electric shock. Power off, unplug, and remove the battery of your device before continuing.

  • Close the battery door, and turn the camera over so that the bottom of the camera is facing up.

  • Using a PH000 screwdriver, remove the two 5.5mm screws.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.