Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará la guía que incluye este paso.
Traduciendo paso 1
Paso 1
-
Remove the four PH00 2.5 mm screws around the edges of the display plate.
-
Remove the three PH00 2 mm screws from the sides of the buttons plate and the 2.5 mm screw from the center of the buttons plate.
-
Lift the buttons plate out of the camera with the plastic tool.
-
Lift the display plate out of the camera with the plastic tool.
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.