Nikon Coolpix S210 LCD screen Replacement

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 3 guías que incluyen este paso.

Inglés

Español

Traduciendo paso 1

Paso 1

Having removed the back case, the LCD screen should be sitting loosely on the camera, attached only by a wide ribbon and a narrow ribbon.
The ribbons are connected to and held in place by small plastic latches.
To remove the wide ribbon, gently pry the spudger underneath the black plastic latch where the ribbon connects and lift up. The ribbon should slide out easily.
Repeat the same process with the smaller ribbon, this time looking for a light blue latch.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.