PSP 300xc Home Bar Replacement

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 9 guías que incluyen este paso.

Inglés

Español

Traduciendo paso 1

Paso 1

Lift the home bar up as high as it will go, but not so high that the wires disconnect.
Try to bend the small tab under the silver rim as little as possible it the following steps. The more you bend, the more likely it will snap.
Twist the home bar counter clockwise while carefully lifting it further. The left edge has to lift over the black plastic frame to allow it to rotate.
The home bar should now lift out of the PSP 300xc.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.