Saltar al contenido principal

Canon PowerShot A2500 Body Casing and Faceplate Replacement

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 5 guías que incluyen este paso.

Inglés
Español
Paso 3
Canon PowerShot A2500 Body Casing and Faceplate Replacement: paso 0, imagen 1 de 3 Canon PowerShot A2500 Body Casing and Faceplate Replacement: paso 0, imagen 2 de 3 Canon PowerShot A2500 Body Casing and Faceplate Replacement: paso 0, imagen 3 de 3
  • Remove the 6 Phillips #00 exterior screws from the camera. Two are located on the bottom and two are located on either side as shown. Notice that one of the screws is under the AV Out Digital flap on the side. All exterior screws should be 2.4mm in length

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.