Saltar al contenido principal

Canon Powershot ELPH 100 HS Outer Case Replacement

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 2 guías que incluyen este paso.

Inglés
Español
Paso 4
Canon Powershot ELPH 100 HS Outer Case Replacement: paso 0, imagen 1 de 2 Canon Powershot ELPH 100 HS Outer Case Replacement: paso 0, imagen 2 de 2
  • Use the Philips #00 screwdriver to pry open the charging port cover.

  • Once you pry open the charging port cover, rotate the cover so that you have access to the screw underneath. Which is seen in the next image.

  • Remove both 3.1 mm screws using the Phillips #00 screwdriver.

  • The image still shows the screw from step 3 in place.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.