Canon PowerShot SD200 LCD Screen Replacement

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 3 guías que incluyen este paso.

Inglés

Español

Traduciendo paso 4

Paso 4

Hold the camera at an angle to locate the small blue ZIF connector on the back side of the motherboard and next to the LCD screen.
Use the flat end of the spudger to flip up the tab of the blue ZIF connector. Slide the ribbon cable out.
Once the ribbon is removed, the LCD screen can be rotated away from its initial position to reveal more screws underneath.
Do not pull the LCD screen out or rotate past 180 degrees away from its initial position, or else you will damage the remaining ribbon that holds the LCD sceen in place.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.