HP All-in-one PC Model 24 Motherboard Replacement

Volver a la Guía

Inglés

Español

Paso anterior Siguiente paso

Traduciendo paso 8

Paso 8

HP All-in-one PC Model 24 Motherboard Replacement, Removing the Storage: paso 0, imagen 1 de 3

HP All-in-one PC Model 24 Motherboard Replacement, Removing the Storage: paso 0, imagen 2 de 3

HP All-in-one PC Model 24 Motherboard Replacement, Removing the Storage: paso 0, imagen 3 de 3

Removing the Storage

Locate the Storage Drive
Unscrew the Storage: Use a screwdriver to remove any screws securing the storage drive.
Very Small Screw: This screw requires the precision screwdriver.
Remove the Storage Drive: Once the screws are removed, remove the drive from the compartment. Do this by pulling directly away from the connector.
WARNING: Do not pull with excessive force. The drive should come out easily.
Note: Place the storage drive in a safe location to prevent any static discharge or physical damage.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.