Repara tus cosas Comunidad Tienda

HP All-in-one PC Model 24 Motherboard Replacement

Volver a la Guía
Inglés
Español
Paso 6
HP All-in-one PC Model 24 Motherboard Replacement, Removing the Ribbon Cable from the Screen: paso 0, imagen 1 de 2 HP All-in-one PC Model 24 Motherboard Replacement, Removing the Ribbon Cable from the Screen: paso 0, imagen 2 de 2
Removing the Ribbon Cable from the Screen

  • Disconnect the Ribbon Cable: Gently lift the small locking mechanism or tab that secures the ribbon cable.

  • Note: This is often a ZIF (Zero Insertion Force) connector, which can be carefully pulled up to release the cable.

  • WARNING: Be very gentle when handling the ribbon cable, as it can be fragile and can tear if too much force is applied.

  • Carefully remove the Ribbon Cable: Once the tab is lifted, gently pull the ribbon cable out of its connector.

  • Note: Take care not to pull on the cable too harshly, as it may be connected to other parts. Also, make sure it is not bent or damaged during the process.

  • Note If your fingernails cannot reach the connector, see step 13 for an alternative method.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.