Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 8 guías que incluyen este paso.
Traduciendo paso 1
Paso 1
-
In the following steps, you will be placing the remaining pieces of adhesive on the front panel.
-
Do not peel the clear backing off the strips just yet.
-
Place the bridge shaped adhesive strip between the top edge of the inner frame of the front panel and the camera mounting bracket.
-
Smooth the strip down from the center out, taking care to not trap any air bubbles between the strip and the front panel.
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.