Saltar al contenido principal

Butane Replacement in a Handheld BIC Lighter

Inglés
Español
Paso 2
Butane Replacement in a Handheld BIC Lighter: paso 0, imagen 1 de 1
  • Take your can of Butane and put the rubber ingot over the tip of the nozzle.

  • Make sure that the hole in your ingot lines up with the hole in the Butane nozzle. This is to make an airtight seal so that the Butane doesn't leak out.

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.