Repara tus cosas Comunidad Tienda

Reemplazo del ensamblaje de la pantalla de Nokia G42 5G

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará la guía que incluye este paso.

Volver a la Guía
Inglés
Español
Paso anterior

Traduciendo paso 7

Paso 7
Nokia G42 5G Screen Assembly Replacement, Only the screen assembly remains: paso 0, imagen 1 de 1
Only the screen assembly remains

  • Only the screen assembly remains.

  • During reassembly, compare your new replacement assembly to the original part:

  • If your part comes with battery adhesive pre-installed, remove its plastic liners before continuing to the previous step.

  • If your part has no battery adhesive, remove the clear liner on the pre-cut battery adhesive and apply the sticky section to the battery well. Remove the opaque liner before continuing to the previous step.

  • If you're reusing your original battery, carefully inspect it for any signs of physical damage. If it's bent, creased, dented, or scratched, replace it with a new battery. Installing a damaged battery is a safety hazard.

Solo queda el ensamblaje de pantalla

Solo queda el conjunto de pantalla.

Compara el nuevo conjunto de repuesto con la pieza original: es posible que tengas que transferir los componentes restantes o retirar los adhesivos de la pieza nueva antes de instalarla.

Si vas a reutilizar tu batería original, inspecciónala cuidadosamente para detectar cualquier signo de daño físico. Si estádoblada, arrugada, abollada o rayada, sustitúyela por una batería nueva. Instalar una batería dañada es un riesgo para la seguridad.

[title] Only the screen assembly remains
[* black] Only the screen assembly remains.
-[* icon_reminder] Compare your new replacement assembly to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before you install it.
+[* icon_reminder] During reassembly, compare your new replacement assembly to the original part:
+ [* black] If your part comes with battery adhesive pre-installed, remove its plastic liners before continuing to the previous step.
+ [* black] If your part has no battery adhesive, remove the clear liner on the pre-cut battery adhesive and apply the sticky section to the battery well. Remove the opaque liner before continuing to the previous step.
[* icon_caution] If you're reusing your original battery, carefully inspect it for any signs of physical damage. If it's [link|https://guide-images.cdn.ifixit.com/igi/CmJ6ZiW1sIQZLjoC.full|bent, creased|new_window=true], [link|https://guide-images.cdn.ifixit.com/igi/OrnT4eml322MUDj1.full|dented, or scratched|new_window=true], replace it with a new battery. ***Installing a damaged battery is a safety hazard.***

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.