Repara tus cosas Comunidad Tienda

Procedimiento de apertura

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 16 guías que incluyen este paso.

Volver a la Guía
Inglés
Español
Paso 3
Opening Procedure, Anti-Clamp instructions: paso 0, imagen 1 de 3 Opening Procedure, Anti-Clamp instructions: paso 0, imagen 2 de 3 Opening Procedure, Anti-Clamp instructions: paso 0, imagen 3 de 3
Anti-Clamp instructions

  • The next three steps demonstrate the Anti-Clamp, a tool we designed to make the opening procedure easier. If you aren't using the Anti-Clamp, skip down three steps for an alternate method.

  • For complete instructions on how to use the Anti-Clamp, check out this guide.

  • Pull the blue handle backwards to unlock the Anti-Clamp's arms.

  • Place an object under your iPad so it rests level between the suction cups.

  • Position the suction cups near the middle of the left edge—one on the top, and one on the bottom.

  • Hold the bottom of the Anti-Clamp steady and firmly press down on the top cup to apply suction.

  • If you find that the surface of your iPad is too slippery for the Anti-Clamp to hold onto, use tape to create a grippier surface.

Instrucciones para Anti-clamp

Los tres pasos siguientes muestran el Anti-Clamp, una herramienta que hemos diseñado para facilitar el procedimiento de apertura. Si no utilizas el Anti-Clamp, sáltate los tres pasos siguientes para utilizar un método alternativo.

Para obtener instrucciones completas sobre cómo utilizar el Anti-Clamp, consulta esta guía.

Tira del mango azul hacia atrás para desbloquear los brazos del Anti-Clamp

Coloca un objeto debajo del iPad para que quede nivelado entre las ventosas.

Coloca las ventosas cerca del centro del borde izquierdo: una en la parte superior y otra en la inferior.

Mantén fija la parte inferior del Anti-Clamp y presiona firmemente la ventosa superior para aplicar succión.

Si la superficie de tu iPad es demasiado resbaladiza para que el Anti-Clamp se agarre, utiliza cinta adhesiva para crear una superficie más adherente.

[title] Anti-Clamp instructions
-[* icon_note] The next three steps demonstrate the Anti-Clamp, a tool we designed to make the opening procedure easier. ***If you aren't using the Anti-Clamp, skip down three steps for an alternate method.***
+[* icon_note] The next three steps demonstrate the [product|IF145-513|Anti-Clamp], a tool we designed to make the opening procedure easier. ***If you aren't using the Anti-Clamp, skip down three steps for an alternate method.***
[* icon_note] For complete instructions on how to use the Anti-Clamp, [guide|152309|check out this guide|new_window=true].
[* black] Pull the blue handle backwards to unlock the Anti-Clamp's arms.
[* black] Place an object under your iPad so it rests level between the suction cups.
[* black] Position the suction cups near the middle of the left edge—one on the top, and one on the bottom.
[* black] Hold the bottom of the Anti-Clamp steady and firmly press down on the top cup to apply suction.
[* icon_note] If you find that the surface of your iPad is too slippery for the Anti-Clamp to hold onto, [guide|159595|use tape|new_window=true] to create a grippier surface.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.