Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 4 guías que incluyen este paso.
Traduciendo paso 1
Paso 1
-
Using a Philips driver remove the 18 screws from the rear panel.
-
Gently lift the rear cover off the TV. You may need to wiggle the cover a little however there are no clips holding the cover on so it should come off easily if you have fully unscrewed all 18 screws.
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.