Saltar al contenido principal

Reemplazo de la tapa trasera de Samsung Galaxy Note20

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 12 guías que incluyen este paso.

Inglés
Español
Paso 2
Samsung Galaxy Note20 Rear Cover Replacement, Insert an opening pick: paso 0, imagen 1 de 3 Samsung Galaxy Note20 Rear Cover Replacement, Insert an opening pick: paso 0, imagen 2 de 3 Samsung Galaxy Note20 Rear Cover Replacement, Insert an opening pick: paso 0, imagen 3 de 3
Insert an opening pick
  • Apply a suction cup to the heated edge of the rear cover, as close to the edge as possible.

  • Pull up on the suction cup with strong, steady force to create a gap between the rear cover and the frame.

  • Depending on the age of your phone, this may be difficult. If you are having trouble, apply more heat to the edge and try again.

  • Insert an opening pick into the gap.

  • Don't insert the opening pick more than 5 mm into the phone or you risk damaging the internal components.

Aplica una ventosa al borde caliente de la tapa trasera lo más cerca posible del borde.

Tira hacia arriba de la ventosa con una fuerza fuerte y constante para crear un hueco entre la tapa trasera y el marco.

Dependiendo de la edad de tu teléfono, esto puede ser difícil. Si tienes problemas, aplica más calor al borde y vuelve a intentarlo.

Introduce una púa de apertura en el hueco.

No introduzcas la púa de apertura más de 5 mm en el teléfono o corres el riesgo de dañar los componentes internos.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.